Thursday, October 29, 2009

Contest : Senyuman Ceria Si Comel


tetiba takde angin takde taufan teringin plak nak join blog contest.. :P hikhik..

contest ni di anjurkan oleh SMILEYKIDZ Photography.. wahh.. cantik2 gambar2 yg dorang amik tauuuu....

nak join contest ni ada syarat-syarat nye... eh.. mestila kena ada syarat.. kalu tak lembu, cicak, kambing pun leh join contest ni.. hahahha...

Syaratnye :

* Jadi Follower SMILEYKIDZ dan Add SMILEYKIDZ di dalam bloglist anda - OK done..

* Letak banner contest ini di sidebar blog anda dengan link ke entri ini - dah juga...

* Buat entri mengenai Online Contest ~ Senyuman Ceria Si Comel ini di dalam blog anda - siapp...

* Kemudian, upload gambar si comel di dalam entry tersebut dengan senyuman yang paling ceria/happy/sweet. TETAPI hanya SATU (1) gambar terbaik akan di nilai.

Nama anak : NURUL IMAN HANNANI BINTI RAMLI
Umur Sekarang : 3 tahun 6 bulan

Gambar ni di ambil masa Iman berusia 1 tahun 3 bulan... masa ni nak tido dah... mmg masa kecik2 kitorang suke sakat2 dia.. geletek sana sini... time ni tgh2 suke suki la.. pastu cakap kat dia.. "Iman.. smile.. smile... mama nak amik gambo..." terus dia bagi aksi ni.. suke sangat ngan gambar ni.. sbb dia senyum abis2an... sampai sepet2 mata dia... :P

Gambar ni pulak di ambil masa Iman berusia 2 tahun 8 bulan... masa ni nak jalan2 g mana tah lupe.. masa saya dok sibuk2 bersiap nak pakai tudung.. dia pun sibuk nak pakai tudung gak.. so, saya pun pakaikanlah tudung saya.. lipat pendek2.. :D siap pin lagi.. dah beso skek, dah pandai posing la... senyum pun agak2 sinis tp pada pandangan mata saya, alahai.. comelnye anakku.. nampak solehah la.. walaupun mamanye takde la sesolehah mana.. miahahhaa...


* Jangan lupa nyatakan nama si comel dan umurnya. - udahh...

* Dalam entri tersebut pastikan anda mention dan link ke SMILEYKIDZ . - sudah jugak...

* AMARAN: no link back will be disqualified - insya allah.. qualified.. :)

* Bila anda dah puas hati dengan entry tu, TINGGALKAN komen dan LINK entry tersebut di dalam ruang komen entry online contest ini. - dah tinggal comment.. :)

See.. senang gile nak join contest ni.. so, sementara masih ada masa ni.. jom kite join contest ni.. tak rugi wooo...

Hah.. mesti korang nak tau apa adiahnye... hiks... adiahnye sangat lumayan... rasa cam rugi je tak join...

Pemenang Utama x 1 org:

Outdoor fotografi selama 1 jam

~unlimited shots~

~1 sticky album dengan 20kpg gambar terbaik~

******************

Pemenang sampingan x 2 org:

Voucher fotografi SMILEYKIDZ bernilai RM50

see.. see... so, meh kite join reramai.. kasik meriah.. :)

maklumat mengenai contest ni adalah seperti di bawah.. :)

Syarat² lain yg saya kira, alah.. kacang putih je... senang banget nak polo.. (ni gara2 dok layan Eiffel.. I'm In Love... dah tertukar loghat.. :D)


* Terbuka kepada semua mommies/daddies yang mempunyai anak berusia 1 hari - 4 tahun.

* Anda boleh upload seberapa banyak gambar senyuman si comel TETAPI hanya SATU (1) gambar terbaik akan di adili.

* Dalam gambar2 tersebut, mestilah gambar INDIVIDUAL. Kalau ada 2 orang dalam gambar itu, secara automatik gambar itu tidak akan di adili.

* Kalau anda ada lebih dari seorang si comel, boleh upload gambar mereka tetapi MESTILAH gambar INDIVIDU tau!!

* Entry anda HANYA akan di adili oleh SMILEYKIDZ.
* Keputusan peraduan ini adalah MUKTAMAD.
* Penyertaan dibuka dari 15th Oct 09-31th Oct 2009, jam 11.59pm.
* SMILEYKIDZ akan memula sesi penilaian pada bila2 masa.
* SMILEYKIDZ akan meninggalkan komen di dalam entri anda setelah diadili.
* Sebarang pertukaran gambar selepas di adili tidak akan di ambil kira

atau, bolehlah layari blog SMILEYKIDZ.. :)

Ads Click!




Wednesday, October 28, 2009

salah?


cakap salah..
tak cakap salah..

buat ini x boleh..
buat itu pun boleh...

so? tak yah wat pape.. dok dendiam...
memasing ada mata, ada akal, ada fikiran..

sendirik fikir...
sendirik ingat...

sekadar renungan...


Ads Click!




Monday, October 26, 2009

geram.. geram...


saya tgh sakit ati gegile... sesangat sakit ati...
sangat2 tak suke ar ngan sesape jugak arr yg suke buat tuduhan melulu tanpa usul periksa...
tak kira la dia tu sape...

even certain part yg dikatanye tu betul.. tp yg tak bleh blah tu.. siap cite specific lg yg pastinye ianya tak betul.. weng tul... tak pepasal saya dah buat dosa... tp sape yg carik pasal????

bila kite dah cite yg bebetul..
memperbetulkan fakta yg salah ke yang betul..
selamba kodok je dia gelak2 cam takde pape...
pastu bukan nak mintak maaf...
bleh plak bekap2 orang yg buat saya cam tu...
ngok tul...
even orang yg cakap tu family ko sendirik...
tp patut2 la...
takkan ko nak percaya 100% pastu tanpa usul peksa ko tuduh sesedap megi tomyam...
ini boleh mendatangkan panasssssss....

patutlah a*** l**g takmo balik... rupanye sbb perangai family ko cam tu... dah buat taik kat orang cam tu.. pastu ko dok kata2 pasal a*** l**g takmo balik... tuduh dia kuang ajo bagai.. padahal family ko yg buat dajal kat dia... %#$^&*&% punye olang...

** geram gile ni... ada gak orang yg cakap tak pakai otak.. kepala lutut pun tak cam tu..

Ads Click!




Friday, October 23, 2009

hampir ke penghujungnya...


lately mmg takde masa nak buat entry baru.. lately sesangat busy ngan keje.. keje... keje.. dan final exam... god... assignment yg x agak2 macam la tak tau kitorang ni student part time je weih... takpe la... dugaan... bukan sem ni je cam tu.. next next sem pun akan jadi cam ni gak.. nak tak nak kena terima.. a challenge as worker + student + wife + mom...

bukan senang tu.. tp orang kata.. kalu tak rasa tak tau.. so, once dah rasa.. cam tak sesabar nak habiskan ia...

wish me luck ok... final exam will be held on early November.. so.. MUST.. MUST.. MUST... study.. study.. study.... or... sleep.. sleep.. sleep.. hehehe..

kronologi angka :

- 2 years as student
- 3 years as mom
- 5 years as wife
- 6 years as government servant


Ads Click!




Thursday, October 22, 2009

end of ccna1


my entry about CCNA1 is finally end... hope it helps other people out there on their chapter test and final paper..


good luck...

any comments about CCNA, feel free to write down a comment to me..

thank you..


Ads Click!




CCNA - Final


1. Refer to the exhibit. Host B attempts to establish a TCP/IP session with host C. During this attempt, a frame was captured at the FastEthernet interface fa0/1 of the San Francisco router. The packet inside the captured frame has the source IP address 10.10.1.2, and the destination IP address is 10.31.1.20. What is the destination MAC address of the frame at the time of capture?
• 0060.7320.D632
• 0060.7320.D631
• 0040.8517.44C3
• 0009.B2E4.EE03
• 0010.C2B4.3421

2. What are three characteristics of CSMA/CD? (Choose three.)
It monitors the media for presence of a data signal.
• After detecting a collision, hosts can resume transmission after a random timer has expired.
• A jam signal is used to ensure that all hosts are aware that a collision has occurred.
• Devices can be configured with a higher transmission priority.
• Data is transmitted only when the data signal is present.
• It uses a token system to avoid collisions.

3. Refer to the exhibit. The PC, the routing table of which is displayed, is configured correctly. To which network device or interface does the IP address 192.168.1.254 belong?
• PC
• switch
• router interface fa0/0
• router interface fa0/1

4. Refer to the exhibit. Host A wants to access the Internet. Which combination of a Layer 2 address and a Layer 3 address will enable this access from host A?
• Destination MAC: 0030.8596.DE83 Default gateway: 209.165.202.130
• Destination MAC: 0030.8596.DE82 Default gateway: 172.16.9.2
• Destination MAC: 0030.8517.44C4 Default gateway: 172.16.1.1
• Destination MAC: 0030.8517.44C4 Default gateway: 209.165.202.130

5. Refer to the exhibit. Communication between hosts X and Y is restricted to the local network. What is the reason for this?
• The gateway addresses are broadcast addresses.
• Host Y is assigned a multicast address.
• Host X and host Y belong to different networks.
• Host X is assigned a network address.

6. What is the result of using the clock rate 56000 commands at the serial interface of the router?

• The interface is configured as a DCE device.
• The interface timers are cleared.
• The FastEthernet interface is made to emulate a serial interface by assigning it a timing signal.
• The IP address for the serial interface is configured.

7. Which three addresses belong to the category of public IP addresses? (Choose three.)
• 127.0.0.1
• 196.1.105.6
• 132.11.9.99
• 10.0.0.1
• 172.16.9.10
• 46.1.1.97

8. Which three statements are true about transport layer protocols? (Choose three.)
• TCP and UDP manage communication between multiple applications.
• TCP retransmits the packets for which the acknowledgment is not received.
• TCP acknowledges received data.
• UDP exchanges frames between the nodes of the network.
• TCP has no mechanism to acknowledge transmission errors.
• UDP uses windowing and sequencing to provide reliable transfer of data.

9. Refer to the exhibit. Which logical topology describes the exhibited network?
• star
• ring
• point-to-point
• multi-access

10. Which statement is true about the running configuration file in a Cisco IOS device?
• It affects the operation of the device immediately when modified.
• It is stored in NVRAM.
• It should be deleted using the erase running-config command.
• It is automatically saved when the router reboots.

11. Refer to the exhibit. Host C is able to ping 127.0.0.1 successfully, but is unable to communicate with hosts A and B in the organization. What is the likely cause of the problem?
• Hosts A and B are not on the same subnet as host C.
• The IP addresses on the router serial interfaces are wrong.
• The subnet mask on host C is improperly configured.
• The FastEthernet interface fa0/0 of router 1 is wrongly configured.

12. A host is transmitting a video over the network. How does the transport layer allow this host to use multiple applications to transmit other data at the same time as the video transmission?
• It uses error control mechanisms.
• It uses a connectionless protocol only for multiple simultaneous transmissions.
• It uses multiple Layer 2 source addresses.
• It uses multiple port numbers.

13. Refer to the exhibit. PC1 is unable to access PC2. To troubleshoot this problem, the technician needs to confirm that the next hop interface is operational. Which default gateway address should the technician ping from PC1 to confirm this?
• 10.0.0.254
• 192.168.0.249
• 192.168.0.250
• 10.0.1.254

14. Refer to the exhibit. Cable 1 and Cable 2 are wired for specific physical layer requirements. Which three segments use Cable 2? (Choose three.)
• Segment 1
• Segment 2
• Segment 3
• Segment 4
Segment 5
• Segment 6

15. Refer to the exhibit. Which two facts can be determined about the topology? (Choose two.)
• Three networks are needed.
Two logical address ranges are required.
• A single broadcast domain is present.
• Three collision domains are present.
• Four networks are needed.

16. Refer to the exhibit. Which three statements are true about the IP configuration that is displayed? (Choose three.)
• The assigned address is a private address.
• The PC cannot communicate with the DNS server.
• The network can have 126 hosts.
• The prefix of the computer address is /26.
• The IP address is routable on the Internet.
• The IP address is a multicast address.

17. Which password restricts Telnet access to the router?
• enable
• enable secret
• console
• VTY

18. Refer to the exhibit. To create the initial configuration, a network technician connected host A to the router using the connection that is shown. Which statement is true about this connection?
• It terminates at the Ethernet port of the router.
• It provides out-of-band console access.
• It terminates at the serial interface of the router.
• It requires a Telnet client on host A to access the router.

19. Which device should be used for routing a packet to a remote network?
• access switch
• DHCP server
• hub
• router

20. Refer to the exhibit. The serial interface of the router was configured with the use of the commands that are shown. The router cannot ping the router that is directly connected to interface serial 0/0/0. What should the network technician do to solve this problem?
• Configure the description at interface serial 0/0/0.
• Configure an IP address on interface serial 0/0/0.
• Remove the no shutdown command at interface serial 0/0/0
• Reboot the router.

21. Refer to the exhibit. In a network, host A is sending data segments to host B. The flow control of the segments that are being exchanged is displayed. Which two statements are true about this communication? (Choose two.)
• The initial window size is determined via the two-way handshake.
• The window size for the TCP session that is represented is initially set to 3000 bytes.
Acknowledgment number 3001 indicates that host A will send the next segment with sequence number 3001.
• Host B expects that the next received segment number will be 3000.
• No more acknowledgments will be exchanged.

22. Refer to the exhibit. The network administrator wants to remotely access the CLI of the router from PC1 using modem 1. Which port of the router should be connected to modem 2 to enable this access?
• console
• Ethernet
• auxiliary
• serial

23. Which OSI layer uses a connection-oriented protocol to ensure reliable delivery of data?
• application layer
• presentation layer
• session layer
• transport layer

24. What are two functions of the data link layer? (Choose two.)
• It segments and reorders the data.
• It exchanges data between programs that are running on the source and destination hosts.
• It controls how data is placed onto the media.
• It generates signals to represent the bits in each frame.
• It encapsulates each packet with a header and a trailer to transfer it across the local media.


25. Refer to the exhibit. Which list refers only to end devices?
• D,E,F,G
• A,H,B,C
• A,D,E,F
• A,D,E,G

26. Refer to the exhibit. The diagram represents the process of sending e-mail between clients. Which list correctly identifies the component or protocol used at each numbered stage of the diagram?
• 1.MUA 2.MDA 3.MTA 4.SMTP 5.MTA 6.POP 7.MDA 8.MUA
• 1.MUA 2.POP 3.MDA 4.SMTP 5.MTA 6.MDA 7.SMTP 8.MUA
• 1.MUA 2.POP 3.SMTP 4.MDA 5.MTA 6.SMTP 7.POP 8.MUA
• 1.MUA 2.SMTP 3.MTA 4.SMTP 5.MTA 6.MDA 7.POP 8.MUA

27. Refer to the exhibit. Host B was powered off. What change will occur in the MAC table of the switch?
The table will remain unaffected.
• The switch will remove the MAC address at Fa0/19 immediately.
• The switch will retain the MAC address until host B is powered on again.
• The switch will rebuild the MAC table by assigning the FFFF.FFFF.FFFF address to port Fa0/19.

28. Refer to the exhibit. A technician has connected the PC to the switch using a Category 6 UTP cable. Which two statements are true about this connection? (Choose two.)
• The cable that is used is an Ethernet crossover cable.
• The transmit pin of the cable is terminated to the receive pin.
• The maximum distance between the switch and the PC can be 100 m.
• The maximum supported bandwidth is 1000 Mb/s.
• The Category 6 cable simulates a point-to-point WAN link and is unusable for this type of connection.

29. Refer to the exhibit. A host is using NAT to connect to the Internet. Which three IP addresses enable this connection? (Choose three.)
• 10.1.1.63
10.1.1.37
• 10.1.1.39
• 10.1.1.32
• 10.1.1.60
• 10.1.1.2

30. Refer to the exhibit. A PC is communicating with another PC on a remote network. The two networks are connected by three routers. Which action will help to identify the path between the hosts?
• Use the ipconfig command at the host.
• Use the ipconfig/all command at the destination.
• Use the tracert command at the host.
• Use the ping command at the destination.

31. An organization wants to create a subnet of the IP network 172.16.0.0. This subnet will accommodate 1000 hosts. Which subnet mask should be assigned to this network?
• 255.255.0.0
• 255.255.248.0
• 255.255.252.0
• 255.255.254.0
• 255.255.255.0
• 255.255.255.128

32. Refer to the exhibit. A host is connected to hub 1. Which combination of IP address, subnet mask, and default gateway can allow this host to function in the network?
• IP address: 172.16.31.36 Subnet mask: 255.255.255.240 Default gateway: 172.16.31.35
• IP address: 172.16.31.63 Subnet mask: 255.255.255.224 Default gateway: 172.16.31.35
IP address: 172.16.31.29 Subnet mask: 255.255.255.248 Default gateway: 172.16.31.35
• IP address: 172.16.31.32 Subnet mask: 255.255.255.224 Default gateway: 172.16.31.35
• IP address: 172.16.31.29 Subnet mask: 255.255.255.240 Default gateway: 172.16.30.1
• IP address: 172.16.31.37 Subnet mask: 255.255.255.224 Default gateway: 172.16.31.35

33. Refer to the exhibit. A technician uses the nslookup command on the PC and views the output that is displayed in the exhibit. What is the IP address of the primary domain name server configured at the host? (Choose two.)
• 192.168.1.99
• 192.168.2.100
10.10.10.32
• 192.168.1.5
• the IP address of the website resolver1.xyz.local

34. Which OSI layer offers ordered data reconstruction services?
• application layer
• network layer
• presentation layer
• session layer
• transport layer

35. Refer to the exhibit. All devices in the network use default configurations. How many logical address ranges are required in this topology?
• 2
• 3
• 4
• 5
• 6

36. The network administrator wants to install a private application on a server. Which range of port numbers is normally assigned to this application to make it accessible by clients?
• 0 to 255
• 49152 to 65535
• 1024 to 49151
• 0 to 1023

37. Because of a security violation, the router password must be changed. What information can be learned from these configuration entries? (Choose two.)
• Router(config)# line vty 0 4
Router(config-line)# password arj15
Router(config-line)# login
• This configuration allows users to connect by using a modem.
• Users must specify which line, 0 or 4, they wish to connect to when making a connection.
• This configuration allows users to connect to the router via the use of the telnet command.
• This configuration allows five users to make simultaneous connections to this router.
• The configured password is automatically encrypted on the router.

38. Refer to the exhibit. Each media link is labeled. What type of cable should be used to connect the different devices?
• Connection 1 - rollover cable Connection 2 - straight-through cable Connection 3 - crossover cable
• Connection 1 - straight-through cable Connection 2 - crossover cable Connection 3 - rollover cable
• Connection 1 - crossover cable Connection 2 - rollover cable Connection 3 - straight-through cable
• Connection 1 - crossover cable Connection 2 - straight-through cable Connection 3 - rollover cable
• Connection 1 - straight-through cable Connection 2 - straight-through cable Connection 3 - straight-through cable

39. Which two types of media are useful for connecting two devices separated by a distance of 500 meters? (Choose two.)
• 10 BASE-T
• 1000 BASE-TX
• 10 BASE-2
• 1000 BASE LX
• 1000 BASE-SX

40. Which information is used by the router to determine the path between the source and destination hosts?
• the host portion of the IP address
• the network portion of the IP address
• host default gateway address
• the MAC address

41. Refer to the exhibit. What two facts can be determined from the session information that is displayed? (Choose two.)
• This exchange is part of the three-way handshake.
• The destination port indicates that a Telnet session has been initiated.
• The source port does not support communication with the destination port that is listed.
• The destination port indicates that an SMTP session has been initiated.
• The protocol is a connection-oriented protocol.

42. Refer to the exhibit. Host A is accessing multiple servers. Which combination of port number and address will uniquely identify a particular process running on a specific server?
• MAC address of the server and port number of the service
• IP address of the host and port number of the service
• MAC address of the host and port number of the service
• IP address of the server and port number of the service

43. A network technician wants to configure an IP address on a router interface by using the ip address 192.168.1.0 255.255.255.0 command. Which prompt should the technician see when entering this command?
• Router>
• Router(config-if)#
• Router#
• Router(config)#

44. Refer to the exhibit. Host X is unable to communicate with host Y. Which command can be run at host X to determine which intermediary device is responsible for this failure?
• telnet 192.168.1.1
• ping 192.168.1.1
• ftp 192.168.1.1
• tracert 192.168.1.1

45. Refer to the exhibit. In a network, PC1 sends a message to PC2. The frame received at PC2 is shown. What information in this frame determines the correct destination application?
• timing and synchronization bits
• destination and source physical addresses
• destination and source logical network addresses
• destination and source process numbers

46. An organization has been assigned network ID 10.10.128.0 and subnet mask 255.255.224.0. Which IP address range can be used for this organization?
• 10.10.128.0 to 10.10.160.255
• 10.10.128.0 to 10.10.159.255
• 10.10.128.0 to 10.10.192.255
• 10.10.128.0 to 10.10.0.159
• 10.10.128.0 to 10.10.159.0

47. What is the effect of using the Router# copy running-config startup-config command on a router?
• The contents of ROM will change.
• The contents of RAM will change.
• The contents of NVRAM will change.
• The contents of flash will change.

48. Which three IPv4 addresses represent valid host addresses for a subnet? (Choose three.)
• 10.1.12.79/28
• 10.1.12.113/28
• 10.1.12.32/28
• 10.1.11.5/27
• 10.1.11.97/27
• 10.1.11.128/27
49. Refer to the exhibit. The NAT functionality of the router is enabled to provide Internet access to the PC. However, the PC is still unable to access the Internet. Which IP address should be changed to 209.165.201.1 to enable the PC to access the Internet?
• 192.168.1.191
• 192.168.1.101
• 192.168.1.1
• 192.168.1.254

50. Which three statements are true about network layer addressing? (Choose three.)
• It uniquely identifies each host.
• It assists in forwarding packets across internetworks.
• It uses a logical 32-bit IPv4 address.
• It is not a configurable address.
• It is a physical address.
• It identifies the host from the first part of the address.



Ads Click!




Wednesday, October 21, 2009

CCNA1 - Chapter 11


1. Immediately after a router completes its boot sequence, the network administrator wants to check the routers configuration. From privileged EXEC mode, which of the following commands can the administrator use for this purpose? (Choose two.)

show flash
show NVRAM
show startup-config show running-config
show version

2. When network services fail, which port is most often used to access a router for management purposes?

AUX
Ethernet
Console
Telnet
SSH

3.Refer to the exhibit. The output is shown for the show ip route command executed on Router A. What does the IP address 192.168.2.2 represent?

Gateway for the 192.168.1.0 network
Gateway for the 192.168.3.0 network
IP assigned to the serial port on Router A
IP assigned to the serial port on Router B

4.
Refer to the exhibit. What command will place the router into the correct mode to configure an appropriate interface to connect to a LAN?

UBAMA# configure terminal
UBAMA(config)# line vty 0 4
UBAMA(config)# line console 0
UBAMA(config)# interface Serial 0/0/0
UBAMA(config)# interface FastEthernet 0/1

5. What command is used to change the default router name to Fontana?

Router# name Fontana
Router# hostname Fontana
Router(config)# name Fontana
Router(config)# hostname Fontana

6. In a Cisco router, when do changes made to the running-configuration take effect?

after a system restart
as the commands are entered
when logging off the system
when the configuration is saved to the startup-configuration

7. In a Cisco device, where is the IOS file stored prior to system startup?

RAM
ROM
Flash
NVRAM

8.
Refer to the exhibit. Which names correctly identify the CLI mode represented by the prompt for Switch-East4#? (Choose two.)

line configuration mode
user executive mode
global configuration mode
privileged executive mode
interface configuration mode
enable mode

9. On a Cisco router, which interface would be used to make the initial configuration?

10. Which combination of keys would be used at the CLI prompt to interrupt a ping or traceroute process?

Ctrl-C
Ctrl-P
Ctrl-R
Ctrl-Shift-6
Ctrl-Z

11. A network administrator needs to keep the user ID, password, and session contents private when establishing remote CLI connectivity with a router to manage it. Which access method should be chosen?

Telnet
Console
AUX
SSH

12.
Refer to the exhibit. A technician applies the configuration in the exhibit to a clean router. To verify the configuration, the technician issues the show running-config command in the CLI session with the router. What lines should the technician expect to see in the router output from the show running-config command?

enable password class
line console 0
password ccna
enable secret cisco
enable password class
line console 0
password ccna

enable secret 5 $1$v0/3$QyQWmJyT7zCa/yaBRasJm0
enable password class
line console 0
password ccna

enable secret cisco
enable password 7 14141E0A1F17
line console 0
password 7 020507550A

enable secret 5 $1$v0/3$QyQWmJyT7zCa/yaBRasJm0
enable password 7 14141E0A1F17
line console 0
password 7 020507550A

13.
Refer to the exhibit. A student is responsible for the IP addressing, configuration and connectivity testing of the network shown in the graphic. A ping from host B to host C results in a destination unreachable but a ping from host B to host A was successful. What two reasons could account for this failure based on the graphic and partial router output for the Dallas router? (Choose two.)

The host A is turned off.
The Fa0/0 interface on Dallas is shutdown.
The LAN cable is disconnected from host B.
The S0/0/1 IP address of Dallas is improperly configured.
The Fa0/0 interface on Dallas is in a different subnet than host B.
The clock rate is missing on the serial link between Dallas and NYC.

14. Users in the network are experiencing slow response time when doing file transfers to a remote server. What command could be issued to determine if the router has experienced any input or output errors?

show running-config
show startup-config
show interfaces
show ip route
show version
show memory

15.The connection between routers B and C has been successfully tested. However, after rebooting router C, the administrator noticed the response time between networks 10.10.3.0 and 10.10.4.0 is slower. Ping between the two routers is successful. A trace route indicates three hops from router B to router C. What else can be done to troubleshoot the problem?

Ping router B S0/1 connection from router C.
Trace the connection between router B to router C S0/1.
Issue a show ip route command in router B to verify routing is enabled.
Issue a show ip interface brief command on router C.

16. Which three terms correctly define the forms of help available within the Cisco IOS? (Choose three.)

hot keys
context-check
context-sensitive
structured check
command override
command syntax check

17.
Refer to the exhibit. A network administrator on HostA has problems accessing the FTP server. Layer three connectivity testing was successful from HostA to the S1 interface of RouterB. Which set of commands will allow the network administrator to telnet to RouterB and run debug commands?

RouterB(config)# enable secret class
RouterB(config)# line vty 0 4
RouterB(config-if)# login

RouterB(config)# enable secret class
RouterB(config)# line vty 0 2
RouterB(config-vty)# password cisco
RouterB(config-vty)# login

RouterB(config)# enable secret class
RouterB(config)# line vty 0
RouterB(config-line)# password cisco
RouterB(config-line)# login

RouterB(config)# enable secret class
RouterB(config)# line aux 0
RouterB(config-line)# password cisco
RouterB(config-line)# login

RouterB(config)# enable secret class
RouterB(config)# line aux 0
RouterB(config-vty)# password cisco
RouterB(config-vty)# login

18.
The serial connection shown in the graphic needs to be configured. Which configuration commands must be made on the Sydney router to establish connectivity with the Melbourne site? (Choose three.)

Sydney(config-if)# ip address 201.100.53.2 255.255.255.0
Sydney(config-if)# no shutdown
Sydney(config-if)# ip address 201.100.53.1 255.255.255.224
Sydney(config-if)# clock rate 56000
Sydney(config-if)# ip host Melbourne 201.100.53.2

19.
Refer to the exhibit. What additional command is required to allow remote access to this switch from hosts outside the local network?

NA-SW1(config-if)# no shutdown
NA-SW1(config)# enable password password
NA-SW1(config)# ip default-gateway address
NA-SW1(config-if)# description description


Ads Click!




Tuesday, October 20, 2009

CCNA1 - Chapter 10


1. Which device is used to create or divide broadcast domains?

hub
switch
bridge
router
repeater

2. Which option identifies the primary interface which would be used for initial configuration of a Cisco router?

AUX interface
Ethernet interface
serial interface
console interface

3. What makes fiber preferable to copper cabling for interconnecting buildings? (Choose three.)

greater distances per cable run
lower installation cost
limited susceptibility to EMI/RFI
durable connections
greater bandwidth potential
easily terminated

4. A network administrator is required to use media in the network that can run up to 100 meters in cable length without using repeaters. The chosen media must be inexpensive and easily installed. The installation will be in a pre-existing building with limited cabling space. Which type of media would best meet these requirements?

STP
UTP
coaxial
single-mode fiber
multimode fiber

5. What does the term "attenuation" mean in data communication?

loss of signal strength as distance increases
time for a signal to reach its destination
leakage of signals from one cable pair to another
strengthening of a signal by a networking device

6. How many host addresses may be assigned on each subnetwork when using the 130.68.0.0 network address with a subnet mask of 255.255.248.0?

30
256
2046
2048
4094
4096

7. Which subnet mask would be assigned to the network address of 192.168.32.0 to provide 254 useable host addresses per subnetwork?

255.255.0.0
255.255.255.0
255.255.254.0
255.255.248.0

8. A company is planning to subnet its network for a maximum of 27 hosts. Which subnet mask would provide the needed hosts and leave the fewest unused addresses in each subnet?

255.255.255.0
255.255.255.192
255.255.255.224
255.255.255.240
255.255.255.248

9. What type of network cable is used between a terminal and a console port?
cross-over
straight-through
rollover
patch cable

10. Which three types of connectors are commonly associated with Cisco's V.35 serial cables? (Choose three.)

RJ 11
DB 60
Winchester 15 pin
DB 9
smart serial
RJ 45

11.

Refer to the exhibit. What destination IP address will PC1 place in the header for a packet destined for PC2?

192.168.1.1
192.168.2.1
192.168.2.2
192.168.3.1
192.168.3.54

12.
Refer to the exhibit. Based on the IP configuration shown, what would be the result of Host A and Host B attempting to communicate outside the network segment?

both host A and B would be successful
host A would be successful, host B would fail
host B would be successful, host A would fail
both Host A and B would fail

13. What are two common methods for setting a UTP Ethernet port to MDI or MDIX operation? (Choose two.)

cable color code association
cable selection and configuration
use of cable testers to determine pinouts
the automatic detection and negotiating of MDI/MDIX operation of the port
the enabling of the mechanism to electrically swap the transmit and receive pairs

14.


Refer to the exhibit. How many subnets are required to support the network that is shown?

2
3
4
5

15.

Refer to the exhibit. A student working in the lab selects a cable that is wired as shown. Which connection types can successfully be made with this cable? (Choose two.)

connecting a PC to a router's console port
connecting two routers together via their fast ethernet ports
connecting two switches together at gigabit speeds
connecting a PC to a switch at Gigabit Ethernet speeds
connecting two devices with the same interface type at Fast Ethernet speeds


16.
Refer to the exhibit. A student is setting up a home network primarily used for extensive file transfers, streaming video, and gaming. Which network device is best suited to these types of activities in the topology shown?

wireless access point
router
hub
switch

17. Which three statements are true about the role of routers in the network? (Choose three.)

They propagate broadcasts.
They enlarge collision domains.
They segment broadcast domains.
They interconnect different network technologies.
Each router interface requires a separate network or subnet.
They maintain a common frame format between LAN and WAN interfaces.

18.
Refer to the exhibit. A network administrator has decided to use packet capture software to evaluate all traffic from the student subnet on the way to the Internet. To ensure that all packets are captured, what network device should be used to connect the monitoring station to the network between R1 and R2?

hub
router
firewall appliance
wireless access point

19.

Refer to the exhibit. Assume that all devices are using default settings. How many subnets are required to address the topology that is shown?

1
3
4
5
7

20.

Refer to the exhibit. Which three statements are true about the exhibited topology? (Choose three.)

Hosts B and C are in the same subnet.
Five broadcast domains are present.
Host B is using a crossover cable to connect to the router.
Four broadcast domains are present.
Five networks are shown.
Host B is using a rollover cable to connect to the router.

21. To establish a console connection from a computer to a Cisco router, which cable wiring option would be used?

crossover cable
straight through cable
rollover cable
V.35 cable

22.
Refer to the exhibit. Which three statements identify the type of cabling that would be used in the segments that are shown? (Choose three.)

Segment 1 uses backbone cabling.
Segment 1 uses a patch cable.
Segment 3 uses patch cabling.
Segment 3 uses vertical cabling.
Segment 3 uses horizontal cabling.
Segment 4 uses vertical cabling.

23.

Refer to the exhibit. A network technician has been allocated the 192.168.1.0/24 private IP address range for use in the network that shown in the exhibit. Which subnet mask would be used to meet the host requirements for segment A of this internetwork?

255.255.255.128
255.255.255.192
255.255.255.224
255.255.255.240
255.255.255.248





Ads Click!




Friday, October 16, 2009

I Have A Date With Spring - The Musical


mesti korang boring.. asik dok cite cina.. cite cineee jee... :P nak buat cemana.. dah suke... :D


I Have A Date With Spring yg dulunye hanya muncul dalam versi drama... ye drama.. yg saya dok gila-gilakan tu le... hehhe... now come with musical.. :) mesti seronok kan... sbb lagu2 dalam cite dia mmg sedap gile ar... saya yg melayu campuran (mix sebenarnya : mak cina tp orang melayu bela.. pastu ayah jaworld) pun leh suke...


see... betapa bestnye lagu2 dia.. sampai dok hafal2 tak hengat dunia la... dulu sanggup beli walkman ngan kaset kosong semata2 nak rakam lagu2 dalam cite ni.. hikhik... pastu play sebaris lagu dia.. pastu pause.. salin kat buku.. pastu play lg... :P kelakar sangat bile tingat balik cite zaman dolu2...

ok.. back to the track.. :P since I Have A Date With Spring ala2 masih femes lg.. sbb baru abis kan.. so, Dama Orchestra akan mempersembahkan I Have A Date With Spring - The Musical dari 10 Okt - 8 November 2009..

Venue : Pentas 1, Kuala Lumpur Performing Arts Centre, Sentul Park, Jalan Strachan, Off Jalan Ipoh, KL


yang baju biru tu akan pegang watak Fong Peng
baju merah Nancy
baju kuning gold Lulu
baju putih Butterfly Yiu

see... sangat hafal ngan watak2 dalam cite dia... my favvy character adalah Lulu ngan Yiu Siu Dip.. sbb Lulu ni ala2 manje... n Siu Dip ni of course la.. watak utama.. mestilah suke kan.. :) cume pelakon dia dalam drama of course la tak sama ngan musical ni.. tp yg pasti.. lagu2 dia.. of course killer songs yg ada dalam drama ni... hello.. saya hafal ye semer lagu2 dia... dari lagu yg gedik2 tu sampai la lagu yg saksafon tu... hiks... punye la gile... :D

detail pasal musical ni boleh dilayari melalui sesawang (website le..) I Have A Date With Spring - The Musical boleh juga preview konsert dia di I Have A Date With Spring Preview

korang nak tgk tak? jom kite tgk sesamee... jom ar.. jom arrr....

Ads Click!




Thursday, October 15, 2009

crazy of IHADWS..


I'm crazy of I Have A Date With Spring right now... yeee... cite tu dah abis dah.. smalam last episode.. kebetulan smalam ada abang pump nak repair water pump... pastu dok tgk la cite tu... uwaaa... dah last episode... really.. really.. crazy about this drama...

dulu masa zaman sekolah2 menengah pun mmg dok gile ngan cite ni.. tetiap hari pas balik skolah mmg berkejar la nak tgk citer ni...

zaman dedolu... dok berangan... jadik watak Siu Dip... pastu berangan.. pakwe sehensem Ka Hao.. hohohooo... skang pun berangan gak... hikhikk...

since cite ni dah abis... saya sangat berharap akan ada ulangan cite ni tp waktu malam2 la.. baru leh tgk.. kalu sensiang jenuh la tetiap hari nak balik umah semata2 nak tgk cite ni time rehat.. ngeh ngehhh...

tak pun.. sape2 yg ada source utk donlod cite ni.. or tempat2 yg ada jual vcd / dvd cite ni.. saya nakk...

i'm crazy 'bout the story...
i'm crazy 'bout the actor...
i'm crazy 'bout the actress...
i'm crazy 'bout the song...

i love this drama... whoever yg ada source on this drama.. please leave me a message...

Ads Click!




Tuesday, October 13, 2009

CCNA 1


to all CCNA1 students,

CCNA1 chapter 10 - final will be upload tomorrow.. hope it will help you on your chapter test.. :)

enjoy yourself @ my blog and feel free to click on my ads .. ;)

thanks..

anil

Ads Click!




CCNA1 - Chapter 9


1.

Refer to the exhibit. Host_A is attempting to contact Server_B. Which statements correctly describe the addressing Host_A will generate in the process? (Choose two.)

A packet with the destination IP of Router_B.
A frame with the destination MAC address of Switch_A.
A packet with the destination IP of Router_A.
A frame with the destination MAC address of Router_A.
A packet with the destination IP of Server_B.
A frame with the destination MAC address of Server_B.

2. Convert the binary number 10111010 into its hexadecimal equivalent. Select the correct answer from the list below.

85
90
BA
A1
B3
1C

3. Which of the following describe interframe spacing? (Choose two.)

the minimum interval, measured in bit-times, that any station must wait before sending another frame
the maximum interval, measured in bit-times, that any station must wait before sending another frame
the 96-bit payload padding inserted into a frame to achieve a legal frame size
the 96-bit frame padding transmitted between frames to achieve proper synchronization
the time allowed for slow stations to process a frame and prepare for the next frame
the maximum interval within which a station must send another frame to avoid being considered unreachable

4.

In the graphic, Host A has reached 50% completion in sending a 1 KB Ethernet frame to Host D when Host B wishes to transmit its own frame to Host C. What must Host B do?

Host B can transmit immediately since it is connected on its own cable segment.
Host B must wait to receive a CSMA transmission from the hub, to signal its turn.
Host B must send a request signal to Host A by transmitting an interframe gap.
Host B must wait until it is certain that Host A has completed sending its frame.

5. Which statements correctly describe MAC addresses? (Choose three.)

dynamically assigned
copied into RAM during system startup
layer 3 address
contains a 3 byte OUI
6 bytes long
32 bits long

6. Which two features make switches preferable to hubs in Ethernet-based networks? (Choose two.)

reduction in cross-talk
minimizing of collisions
support for UTP cabling
division into broadcast domains
increase in the throughput of communications

7. Ethernet operates at which layers of the OSI model? (Choose two.)

Network layer
Transport layer
Physical layer
Application layer
Session layer
Data-link layer

8. After an Ethernet collision, when the backoff algorithm is invoked, which device has priority to transmit data?

the device involved in the collision with the lowest MAC address
the device involved in the collision with the lowest IP address
any device in the collision domain whose backoff timer expires first
those that began transmitting at the same time

9. Host A has an IP address of 172.16.225.93, a mask of 255.255.248.0, and a default gateway of 172.16.224.1. Host A needs to send a packet to a new host whose IP is 172.16.231.78. Host A performs the ANDing operation on its address and subnet mask. What two things will occur? (Choose two.)

Host A will get a result of 172.16.224.0 from the AND process.
Host A will send on to the media a broadcast frame that contains the packet.
Host A will broadcast an ARP request for the MAC of the host 172.16.231.78.
Host A will change the destination IP of the packet to 172.16.224.1 and forward the packet.
Host A will encapsulate the packet in a frame with a destination MAC that is the MAC address associated with 172.16.224.1.

10. Which of the following is a drawback of the CSMA/CD access method?

Collisions can decrease network performance.
It is more complex than non-deterministic protocols.
Deterministic media access protocols slow network performance.
CSMA/CD LAN technologies are only available at slower speeds than other LAN technologies.

11. What are three functions of the upper data link sublayer in the OSI model? (Choose three.)

recognizes streams of bits
identifies the network layer protocol
makes the connection with the upper layers
identifies the source and destination applications
insulates network layer protocols from changes in physical equipment
determines the source of a transmission when multiple devices are transmitting

12. What three primary functions does data link layer encapsulation provide? (Choose three.)

addressing
error detection
frame delimiting
port identification
path determination
IP address resolution

13.
Refer to the exhibit. Which option correctly identifies content that the frame data field may contain?

preamble and stop frame
network layer packet
physical addressing
FCS and SoF

14. Ethernet operates at which layer of the TCP/IP network model?

application
physical
transport
internet
data link
network access

15. When a collision occurs in a network using CSMA/CD, how do hosts with data to transmit respond after the backoff period has expired?

The hosts return to a listen-before-transmit mode.
The hosts creating the collision have priority to send data.
The hosts creating the collision retransmit the last 16 frames.
The hosts extend their delay period to allow for rapid transmission.

16. Why do hosts on an Ethernet segment that experience a collision use a random delay before attempting to transmit a frame?

A random delay is used to ensure a collision-free link.
A random delay value for each device is assigned by the manufacturer.
A standard delay value could not be agreed upon among networking device vendors.
A random delay helps prevent the stations from experiencing another collision during the transmission.

17.
Refer to the exhibit. The switch and workstation are administratively configured for full-duplex operation. Which statement accurately reflects the operation of this link?

No collisions will occur on this link.
Only one of the devices can transmit at a time.
The switch will have priority for transmitting data.
The devices will default back to half duplex if excessive collisions occur.

18. What are the two most commonly used media types in Ethernet networks today? (Choose two.)

coaxial thicknet
copper UTP
coaxial thinnet
optical fiber
shielded twisted pair

19. What is the primary purpose of ARP?

translate URLs to IP addresses
resolve IPv4 addresses to MAC addresses
provide dynamic IP configuration to network devices
convert internal private addresses to external public addresses


Ads Click!




CCNA1 - Chapter 8


lama nau saya tak updet pasal CCNA ni.. niat nak updet mg ada.. tp tak berkesempatan.. ye la.. bukan mudah ye nak compile semula soklan2 yg saya amik masa chapter test dulu...

as requested by Flo

1. Which of the following is a characteristic of single-mode fiber-optic cable?

generally uses LEDs as the light source
relatively larger core with multiple light paths
less expensive than multimode
generally uses lasers as the light source

2. Which fiber connector supports full duplex Ethernet?




3. Which characteristics describe fiber optic cable? (Choose two.)

It is not affected by EMI or RFI.
Each pair of cables is wrapped in metallic foil.
It combines the technique of cancellation, shielding and twisting to protect data.
It has a maximum speed of 100 Mbps.
It is the most expensive type of LAN cabling.

4. When is a straight-through cable used in a network?

when connecting a router through the console port
when connecting one switch to another switch
when connecting a host to a switch
when connecting a router to another router

5. An installed fiber run can be checked for faults, integrity, and the performance of the media by using what device?

light injector
OTDR
TDR
multimeter

6. Which method of signal transmission uses radio waves to carry signals?

electrical
optical
wireless
acoustic

7. In LAN installations where potential electrical hazards or electromagnetic interference may be present, what type of media is recommended for backbone cabling?

coax
fiber
Cat5e UTP
Cat6 UTP
STP

8. Which OSI layer is responsible for binary transmission, cable specification, and physical aspects of network communication?

Presentation
Transport
Data Link
Physical

9. In most business LANs, which connector is used with twisted-pair networking cable?

BNC
RJ-11
RJ-45
Type F

10.
Refer to the exhibit. Which type of Category 5 cable is used to make an Ethernet connection between Host A and Host B?

coax cable
rollover cable
crossover cable
straight-through cable

11. What characteristic of UTP cable helps reduce the effects of interference?

the metal braiding in the shielding
the reflective cladding around core
the twisting of the wires in the cable
the insulating material in the outer jacket

12. What is a primary role of the Physical layer in transmitting data on the network?

create the signals that represent the bits in each frame on to the media
provide physical addressing to the devices
determine the path packets take through the network
control data access to the media

13. What is a possible effect of improperly applying a connector to a network cable?

Data will be forwarded to the wrong node.
Data transmitted through that cable may experience signal loss.
An improper signaling method will be implemented for data transmitted on that cable.
The encoding method for data sent on that cable will change to compensate for the improper connection.

14. What are three measures of data transfer? (Choose three.)

goodput

frequency
amplitude
throughput
crosstalk
bandwidth

15. Which type of cable run is most often associated with fiber-optic cable?

backbone cable
horizontal cable
patch cable
work area cable

16. What is considered a benefit of wireless as a media choice?

more host mobility
lower security risks
reduced susceptibility to interference
less impact of the surroundings on the effective coverage area

17. With the use of unshielded twisted-pair copper wire in a network, what causes crosstalk within the cable pairs?

the magnetic field around the adjacent pairs of wire
the use of braided wire to shield the adjacent wire pairs
the reflection of the electrical wave back from the far end of the cable
the collision caused by two nodes trying to use the media simultaneously


Ads Click!




Monday, October 12, 2009

eksiden pertama kali


jumaat lepas... ketika saya sedang bersenang lenang menghantar iman ke sekolah sambil nyanyi2 lagu "akuuuu... bukanlah supermannn...."... tetibaa...

"dungg..."

lantas saya menoleh kebelakang.. saya tgk ada sebuah motorsikal dok kat belakang tgh betulkan handle motorsikal dia...

nak kuar time tu.. macam tak patut plak.. sbb di antara jalan tu keta dok kat lane tengah.. so, saya pun amik keputusan benti depan skek kat tepi jalan... antar sms g tau kat kawan2 saya lambat.. pastu sms kat suami terchenta... iman saya biarkan dia dalam keta n pertama-tama skali.. pastikan dia pakai seat belt la...

kuar2 je.. saya tgk ada sesuatu berlaku pada keta... saya pandang penunggang motorsikal tu.. dia pandang saya..

"apa.. ingat ko pandang aku kenyit2 mata aku leh consider la?"

pastu saya tgk keadaan keta... mmm... ok.. takde pape... pastu penunggang tu agaknye kelam kelibut kot... so, saya pandang dia lg... kali ni ngan jelingan yg agak tajam.. hakhak.. tajam ke? huhu...

"kak.. sorry kak..."

hanya 3 patah perkataan tu je la yg dia mampu katakan.. n saya apatah lg... terus terkesima... bukan sbb tergoda.. auww.. atau tersuke.. ahaks.. jauh skali... tp sbb baru pasan.. budak sekolah rupanye... ni musti budak nak amik PMR...

so, tanpa kata pape... saya pun masuk balik dlm keta.. speechless... 2 minit pas tu.. baru gerak meninggalkan tempat kejadian... dalam hati ni.. Tuhan je yg tauu.. selama saya bawa keta... tak penah walau sekali saya mengalami kemalangan... kalu ada pun.. takat calar bilar tu pun time orang lain yg dok calarkan keta saya..

husband dah koling2 dah malas saya nak angkat sbb kompem nanti dia yg over panik..

sampai je opis.. saya check lagi skali kecalaran keta saya.. mmm.. ok.. yg penting tak pape... takat calar tu.. biasa la...

husband kol buat kali keberapa tah... bla.. bla... blaa...

yg tak bleh blah tu.. dia g marah saya sbb biarkan budak PMR tu lepas.. isk.. isk.. apa daaa.. kesian kat budak tu.. kang tak tenang dia nak amik peksa...

siap soh saya buat report polis lg.. isk.. apa kejadahnye... kalu bumper jatuh bagai takpe la.. elok je bumper tu kat tempatnye.. cuma calar je la... buat gelak abang polisi je nanti... hohoohoo...

apapun, pengajarannye di sini.. kalu eksiden ngan sape2.. tak kisah la.. eksiden kecik ke eksiden beso ke... jgn lupe mintak no tepon orang yg langgar kite or orang yg kite langgar.. in case pape terjadi nanti.. senang...


see... calar skek je... apa nak kecoh2...

zoom lagik.. skek je kan...


kesimpulan : saya sangat percaya pada hukum karma... sesekali kite akan berada di atas.. dan tak tau bila.. kita akan berada di bawah.. so, sementara kita berada di atas... jgn sesekali kita memijak orang di bawah kita.. kerna bila sampai masa kita di bawah.. tak tau berapa ramai lg yg akan memijak kita.. ;)


Ads Click!




Saturday, October 10, 2009

1 step ahead...


lampu + kipas dah siap install kat umah BBST masa bulan pose ari tu.. alhamdulillah.. 1 step ahead dah selamat utk umah kami...

takde la kami amik design yg canggih manggih.. maklum le.. bajet.. bajet.. hehe..

pas nih.. proses utk install KC plak..
sblm tu kumpul2 bajet dulu...
ye la.. duit tak datang dari langit...



insya allah.. takde aral.. tahun depan leh masuk umah...


Ads Click!




Friday, October 9, 2009

bunga-bunga cinta...


seumur hidup saya... baru 2 kali saya dihadiahi dengan sejambak bunga oleh orang yg saya sayang...
pertama... masa konvo saya..
masa ni.. lom kawen lg.. tp dah tunang.. :)
kedua... masa besday saya bebaru ni...

ntah apa angin dia tetiba nak bagi bunga saya pun tak tau..
nak kata masa ni saya merajuk.. tak juga...
nak kata masa ni hari special.. maybe la..

salu bila mintak bunga.. macam2 alasan dibaginye...
"dari bagi bunga.. baik beli makan.. atlis kenyang..."
"bagi bunga wat pe.. bagi adiah le..."

dan macam2 alasan lg la...
orang laki... mmg byk alasan.. :P

so, bila saya dapat bunga ni.. saya rasa sangat suke.. hepi.. seronok...
n saya amat hargai pemberian dia kali ni..
malam nak tido tu.. saya hidu bunga tu byk kali...
supaya kewangian dia dapat meresapi jiwa saya...
supaya dapat mimpi yang indah2...
hehari saya sembur ngan air... bagi nampakm segar...

see.. saya sangat appreciate pemberian org especially bunga.. :P
sbb saya tau..
tak ramai lelaki yg nak belikan bunga utk org yg dia sayang...
maklumlah.. byk 'alasan'...

thanks sayang.. i really appreciate that..

i know u want to gimme more than that...
tapi ini pun dah cukup utk mama..
mama tak nak adiah yg besar2...
mama tak nak celebration yg melampau2...
cukuplah...
sekadar memori dan kenangan manis...
yg telah dan sedang kita kecapi...
dan mama harap..
ianya akan terus kekal sampai ke hujung nyawa...
amin.. amin...

i love you bebeh...

Ads Click!